Product Description Siglent SDS1000X-E-RMK Rack Mount Compatible with Siglent SDS1202X-E, SDS1104X-E, SDS1204X-E Oscilloscopes

Product Description Siglent's STB-3 Oscilloscope Demo / Training Board was designed as a teaching / training aid used to demonstrate how to trigger and display complex signals on a modern oscilloscope. Siglent's STB-3 Oscilloscope Demo / Training Board signals include various sine and square waves, AM, burst, and common serial bus signals. Power is supplied by a standard USB cable.

Product Description Siglent DPB4080 50MHz Differential High-Voltage Probe with a maximun input differential Voltage of 800 V Parameters : DPB4080 Bandwidth: 50 MHz Max. input differential Voltage: 800 V (DC + Peak AC) Range Selection (Attenuation ratio): X10 / X100 Accuracy: +/- 1% Power: Standard DC power adapter (9V/1A) Dimensions 32 x 26 x 9cm ( packing )

Product Description Parameters : CP4020 Bandwidth: 100 KHz Maximum Continuous Current: 20 Arms Peak Current: 60 A Switching Ratio: 50 mV/A, 2 mV/A DC Measurement Accuracy: +/- 2% (50 mV/A) (0.4 – 10 Apk) ; +/- 2% (5 mV/A) (1A – 60 Apk) Power: 9 V battery Weight 400 gramm Dimensions 32 x 26 x 9cm ( packing )

Product Description Siglent USB-GPIB Adapter to allow Non-GPIB Siglent instruments to operate on an existing GPIB interface bus. Siglent's USB-GPIB adapter is used with a Siglent instrument which has the USB Host interface but has no GPIB interface  (eg SDS1000 series digital oscilloscope) .This GPIB connector end follows the IEEE 488.2 standard and the USB connection terminal follows the USB 2.0 specification. Detailed GPIB commands, please consult the “Remote Command Control Manual.” Compatible with: SDM3065X/SDM3055/SDM3045X digital multimeters SDG6000X/SDG5000/SDG2000X/SDG1000X/SDG1000 arbitrary waveform generators SSA3000X/SVA1000X spectrum analyzers SDS1000CFL oscilloscopes NOTE: Not compatible with the SDS1000X, X-E or SDS2000X families of oscilloscopes. Features and Benefits:● This adapter is powered by USB Host interface power supply, no external power supply required● The adapter allows the Siglent instrument through its USB Host interface using GPIB control● GPIB interface only support Device model, does not support Controller mode

Product Description Isolation channel option (ISFE) independently developed by SIGLENT, is designed to measure the strong signal with a digital oscilloscope function modules, is suitable for SIGLENT’s full range of oscilloscope products. It adopts USB port 5V power supply of an oscilloscope, and its maximum input voltage is up to ± 600Vpp. Parameters : ISFE Input Voltage Range: -600 Vpk – +600 Vpk Bandwidth: <= 1 MHz Attenuation Range: 200:1 Output Voltage Range: -3 Vpk – +3 Vpk Input Power: 5 V +/- 5% (USB Power). <200 ma Float voltage between Channel and ground: 1000 Vrms Float voltage between each channel: 2000 Vrms Input Resistance: 9 MOhm

Product Description Siglent BAG-S1 Soft Carry Case for SDS1000DL+/CML+, SDS1000X, SDS1000X-E, SDS2000X-E Series